เครื่องตรวจจับควันไฟ Carbon Monoxide Detector



Carbon Monoxide Detector







Description
เครื่องตรวจจับควัน เตือนภัยเมื่อมีควันไฟ Carbon Monoxide Detector
ใช้สำหรับตรวจจับควันไฟ ใช้งานง่าย ใช้ติดตั้งตามผนัง ฝ้าเพดาน ภายในอาคาร
สำนักงาน โรงแรม โรงงานอุตสหกรรม บ้านพักอาศัย คอนโด หอพัก อื่นๆ เพื่อความปลอดภัย
คุณสมบัติ เครื่องตรวจจับควัน
1.เครื่องตรวจจับควันใช้แบตเตอรี่ ขนาด:  AA 1.5V *(3)
2.เครื่องตรวจจับควันมีระบบเซนเซอร์: โคโลราโดเซ็นเซอร์
3.เครื่องตรวจจับควันมีEN50291
4.เครื่องตรวจจับควันมีความไวแสงเวลาเตื่อน เมื่อมีความเข้มข้นของCarbon
-ภายใน 60 ~ 90 นาที ความเข้มข้น 50ppm;
-ภายในระยะเวลา 10 ~ 40 นาที ความเข้มข้น 100ppm;
-ภายใน 3 นาที ความเข้มข้น 300ppm
5.เครื่องตรวจจับควันมีจอแสดงผล LCD : 4 หลัก 
6.เครื่องตรวจจับควันมีเสียงเตือนดังสูงสุด: 85dB (ที่ระยะ 1 เมตร), 3 สัญญาณความถี่± 0.5KHz
7.เครื่องตรวจจับควันมีรูปแบบการบ่งบอก /ไฟ LED,รูปแบบเสียง:
สแตนด์บาย: ไฟ LED สีเขียวจะกะพริบทุกๆ 30 วินาที
การเตือน:ไฟ LED สีแดงจะกระพริบอย่างรวดเร็ว 4 ครั้งกับเสียงเตือน ทุก 5 วินาทีแล้วทำซ้ำ,
เมื่อแบตเตอรี่ต่ำจะมีเสียงเตือนทุกๆ 30s เมื่อแบตเตอรี่ต่ำกว่า 3.3V  ไฟLED สีเขียวจะกระพริบและมีคำว่า Lb บนหน้าจอ LCD
8.เครื่องตรวจจับควันมีอุณหภูมิที่เหมาะสมในการทำงาน: 0 ~ 40c, 20% ~ 90% RH
9.เครื่องตรวจจับควันมีการติดตั้ง: ฝาผนัง / เพดานติดตั้ง

A perfect item for protecting your family from the dangers of carbon monoxide Advanced level of protection, easy to read with the digital display, even in low light conditions. 

Description:

Loud 85 decibel alarm
Permanent carbon monoxide sensor
· The alarm sound pattern is four short alarm beeps. The red LED will flash while in the alarm mode.
· One chirp every 30 seconds in an indication that the battery is low (need replacement) (green LED still flashes once every 30 seconds).
· Test/Reset button to test the unit electronics and verifies proper unit operation and reset the unit during CO alarm.
· Alarm memory feature: If the unit ever alarms, pressing the button, green LED will flashes once every second for one minute and the peak alarm level will be indicated on the LCD.
· Red LED: When a dangerous level of carbon monoxide is detected the red LED will pulse and a loud alarm pattern will sound.
· The carbon monoxide alarm pattern is 4 short beeps, followed by 5 seconds of silence, followed by 4 short beeps with a corresponding red LED flash. This cycle will continue for 4 minutes and then change to 1 cycle every minute until the device is reset or the CO is eliminated.
Green and red LED lights that indicate normal operation and alarm status.
The unit will sound chirp and red LED flashes once as power up.
Green LED: Flashes every 30 seconds to indicate the unit is operating properly. The green LED will also flash before CO reading is taken and when any button is pressed.
Specifications:
Power Supply
3 AA size batteries (not included)
Sensitivity & Time
50ppm, alarms within 60~90 minutes
100ppm, alarm within 10~40 minutes
300ppm, alarms within 3minutes
Standby Current
<50uA
Alarm Current
<50mA
Operation Ambient Condition
5~40ºC, 20~90%R.H
Color
White
Size
10 x 3.5cm




ไม่มีความคิดเห็น:

แสดงความคิดเห็น